GNSS接收机在探月三期中的应用研究

探月工程对飞行器导航系统的性能提出了更高要求,因而有必要研究GNSS(Global Navigation Satellite System,全球导航卫星系统)接收机在探月任务中的应用。以探月工程三期为应用需求,开展地-月-地转移过程中的GNSS接收机可用性分析、GNSS信号特性分析;并针对低信噪比环境下的高灵敏度接收机系统应用进行设计,采用弱信号捕获算法和弱信号跟踪算法实现-175dBW的灵敏度;最终采用基于轨道动力学模型的卡尔曼滤波方法实现了GNSS自主定轨算法。仿真表明:GNSS接收机在60 000km以下的地-月转移和月-地转移弧段能够为探月飞行器提供100m以内位置精度的导航服务。     

旋流器型式对空气雾化喷嘴雾化特性影响规律

采用试验与数值计算相结合方法研究了不同旋流器型式对双旋流式空气雾化喷嘴喷雾特性的影响规律.采用粒子图像测速(PIV)测量了不同空气雾化喷嘴下游流场结构,并且采用高速摄影仪和激光粒度分析仪,对不同空气流量和燃油流量下的双级旋流空气雾化喷嘴的油雾场形态、索太尔平均直径(SMD)、Rosin-Rammler分布进行试验研究;...     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

并联机器人运动性能的研究现状及发展趋势

随着并联机器人技术的发展,其运动性能的提升成为了发展需求,指出了研究工作空间和奇异位形的必要性。以研究方法为主线,详细阐述了工作空间和奇异位形的国内外研究现状及特点,进一步提炼出个体的创新思想和面临的共同难题。通过深入分析研究方法的原理,找到了解决共同难题的突破口,同时剖析了研究中的尚存难题。结合未来的发展趋势,从结构综合和理论创新两个方面进行突破,能够为并联机器人的发展提供强劲动力。得出的结论和展望给从事这一领域的研究者们提供了参考。     

Special Column:NDT and SHM in Aerospace

<正>Non-Destructive Testing and Structural Health Monitoring(NDT SHM) is one of the major requirements in aerospace structural design and plays an important role in operation and maintenance of aerospace structures. NDT SHM is a technology dealing     

基于MFC的拉扭复合系统界面设计

为了方便对拉扭复合系统中2台伺服电机的控制,设计了基于MFC的上位机界面。通过串口通信,使用不同的按钮操作设置伺服驱动器相应参数,从而控制2台伺服电机的运行。上位机实时接收伺服驱动器监控数据绘制出转速、位移、转矩曲线。针对在数据接收过程中信息帧接收错误的情况,使用拼接两相邻错误信息帧的方法进行修复。结果表明:上位机界面实现了系统功能及对电机运行工况的监控。     

轻量化红外成像制导镜头设计与仿真

根据红外成像制导系统的轻量化、小型化、低成本发展需求，针对制导系统中的光学镜头进行轻量化设计。通过分析超透镜的波前调控原理和加工工艺，利用传输相位调控原理设计了基于硅和氟化钡材料的中红外波长超透镜，工作波长3 μm,镜头厚度小于1 mm，口径50 mm时重量小于10 g，热膨胀系数较低环境适应性好。利用时域有限差分法对超透镜进行了仿真，通过设置对称边界条件缩短了仿真时间。仿真结果表明，当超透镜数值孔径为0.45时，聚焦效率为85%，焦斑半高宽3.4 μm。     

激光陀螺背向散射研究综述

背向散射直接影响激光陀螺的锁区，是阻碍激光陀螺精度提升的主要因素之一。首先，阐述了背向散射与锁区的联系，介绍了背向散射的成因、分类及分析方法。其次，简述了背向散射的检测方法和抑制措施。最后，对背向散射研究现状进行了总结，并对未来发展进行了探讨。研究成果可指导激光陀螺研制过程中的背向散射控制，有助于提升激光陀螺精度水平。